Jim in Sparta, Michigan sent EcoDirect this beautiful sunset photo of his 16.8kW grid-tied PV System. He's using fourty-eight LG Solar 350 Watt NeON2 solar panels with Enphase IQ7 micro inverters to harness to power of the sun to cut down on his home utility bill. Looks great, Jim. Thanks for sharing!
Our customer John sent this photo of his recent add-on to his previous grid-tied solar system.
Our local customer Andy sent us some great photos of his recent DIY installation as well as a report on his installation experience.
Glen in Santa Rosa, CA - 1st place - Glen had this to say about his home solar installation project:I installed 24 LG 350's, and 24 IQ7 Plus micro inverters (8400KW) and an IQ AC combiner box. I did the installation myself on my detached garage. I went a little over what I "needed" in
Our customer Tony sent us these inspiring photos to share of his 7.7kW Grid-Tied system during and after completion. This unique project is on a duplex with a tiered flat roof, so placement was crucial to eliminate excessive shading.
Our customer Curtis in Virginia is doing it himself, installing his residential 11.3kW array using thirty-six Canadian Solar CS3K 315 Watt Mono-PERC solar panels.
Our customer Dennis in McDonough, Georgia sent us this beautiful photo of his recently self-installed IronRidge ground mount.
This 23kW inverter system was designed with a quad stack of XW+ 6848 inverters, 190kWh battery bank of Discover Lithium Iron AES Batteries and 72 Canadian Solar 72 cell solar panels, “this was a ridiculously sized system, but exactly what I wanted.”
The Generac battery back-up system integrates solar power generation for utility off-set with a battery back-up system that will power a few loads during an outage or help off-set your peak time of use rates.
Our customer Ben shares pictures of his sleek 14.4kW SnapNrack ground mount PV array, comprised of Hanwha Q-Cells 300 watt black frame solar panels.
